The screw is an application of the inclined plane, and heremonly used as a fastener herebinations of sheet metal, wood, or plastic together, as hinges on a door.… The screw is also used in manufacturing to apply pressure to slowly push materials through a die in a process known as extrusion. Screw (simple machine) Other mechanisms that use the same principle, also called screws, don't necessarily have a shaft or threads. For example, a corkscrew is a helix-shaped rod with a sharp point, and an Archimedes' screw is a water pump that uses a rotating helical chamber to move water uphill. Drills. The screw portion of an auger, which is another name for a hand drill, is turned using a short series of gears that translate the applied force supplied by the person turning the handle across perpendicular planes. That is, the crank is usually a circle parallel to the axis of the screw for ease of use.

A screw is a type of fastener, in some ways similar to a bolt (see Differentiation between bolt and screw below), typically made of metal, and characterized by a helical ridge, known as a male thread (external thread). Screws are used to fasten materials by digging in and wedging into a material when turned,. Screws used in woodworking will have a pointed tip to help guide the screw into a precise location. Self-drilling screws have a split point that cuts into the wood like a drill bit. Other screws, such as machine screws have no point. Screw Examples. Screws are used to hold things together as they pull or push the object. Screws may also be used for lifting heavy objects and to tighten things, like the vice in the image to the right. Because of the screw's ridges, a screwdriver is used to drive a screw into wood as it is turned in a circular motion.

In the , which shows the main types of screws and screwheads in modern use, the cap and machine screws are used to clamp machine parts together, either when one of the parts has a threaded hole or in conjunction with a nut. These screws stretch when tightened, and the … Same shape and sizing as Phillips, but the screw includes a tamper-resistant pin in the middle. This screw is not used in high torque applications as the design is not very strong and the bits cannot be manufactured to high strength specifications. Quadrex. herebined Phillips and square recess drive. The actual origin of the screw remains unknown. It can probably be attributed to the Near East area. Water screws appeared in the southern Mediterranean area around 300 BC. The first scientific use of a screw is attributed to Archimedes, the Greek mathematician (about 285 - 212 BC).